Rencraft design and build handmade wood kitchens and furniture for every room and they are increasingly using Corian® to compliment their designs.
The above kitchen is a bespoke hand painted and walnut kitchen with Corian® worktops.
It features an arrangement of painted base and wall cupboards around the sink area and a large bank of tall housings which incorporate two ovens a steam oven and two warming drawers. There is a fully integrated fridge and freezer and bespoke larder cupboard.
*The sink run has Corian® worktops in 40mm glacier white with Corian® moulded bowls.*
The centre island measures 6.5m in the diagonal, with walnut units, it has 3 different levels, the main principle level, a slighted raised chopping board and then a raised breakfast area on the back of the island. A stainless steel plinth and bespoke stainless steel handles complete the design and were tailor-made for the project. Within the island there is an induction hob, small prep sink and walnut end-grain chopping board which sits on top of the curved cupboards. There is also a ceiling extractor above the hob.
This kitchen is a combination of curves and straight lines. Oiled walnut and hand painted cupboards, have been used to achieve the overall effect. The base cupboards have been painted a slightly darker shade than those on the wall.
The walnut island has a split level area which provides a large work station together with a sociable raised seating ‘bar’ area.
*The work surfaces and sinks have been manufactured from Corian® which gives a clean and seamless feel.* An end grain walnut chopping board provides both contrast and a durable food preparation area.
As mentioned they don't just do kitchens, the above bathroom has a floating walnut bathroom unit with Glacier White Corian® tops and high up-stand.
Rencraft have showrooms in Sevenoaks and Tunbridge Wells but work nationwide where required. For further information call Sevenoaks, Kent 01732 762682 Tunbridge Wells 01892 520730
We have been distributing Corian® and solid surface tools for over 30 years now and are passionate about providing our Corian® fabricators with the best possible levels of service. We offer high quality technical support to Corian® fabricators as well as helping them with more complex work such as thermoforming. In this News section we aim to share useful information and generally keep you up to date with interesting developments about both Corian® and CDUK.
If you are using Google Chrome please click here to download an RSS viewer.